一些C8051f330的C程序,包括串口通信,键盘,lcd显示等。-some C8051f330 C procedures, including serial communication, keyboard, lcd display. 下载
|
C8051F330部分模块程序,已经调试成功- 下载
|
330PWM输出的简易程序,供C8051F330的初学者参考- 下载
|
基于C8051F330的24c04测试程序 利用I2C接口直接对其读写- 下载
|
BTF330实验程序。针对c8051f330的大部分外设的实验程序- 下载
|
C8051F330 RS232和IIC通信程序 1.本程序是一个调试程序,里面包括RS232和IIC对24LC256的读写代码. 2.要使用RS232时,请把主程序(rs232.c)中 #define UART 0改为#define UART 1 3.通信参数见Initial.c中注释 注意:本压缩包可直接用CYGNAL IDE打开项目RS232test.wsp -C8051F330 and RS232 communication program a IIC. This procedure is a debugger, they include RS232 and 24LC256 IIC to read and write code. 2. using RS232, Please main program (rs232.c) # define UART 0 # define UART changed 1 3. communications parameters Initial.c see Notes Note : the compressed packets can be directly used IDE CYGNAL open projects RS232test.wsp 下载
|
c8051f330单片机 AD采样程序 可以直接运行-c8051f330 SCM AD sampling procedures can be run directly 下载
|
接收机,利用C8051F330编写的接收解码程序!!!!-receivers use C8051F330 prepared to receive the decoding process. ! ! ! 下载
|
C8051F330与CC1100的基本配置。- 下载
|
就是用C8051F330实现锯齿波的C程序,来节省仪器。-is using C8051F330 achieve Sawtooth C procedure to save equipment. 下载
|