功能强大的时钟中断，单片机和FIFO的接口和操作，单片机串口编程问题，纯软件单片机串口，串口通信的单片机程序，程序的多任务和资源复用举例，采用软件定时的计算方法-powerful clock interruption, the 8031 and FIFO interface and operation, the 8031 serial programming, software-only MCU, the MCU serial communication procedures, the procedures for multi-task and resource reuse, for example, regularly use the software method of calculation 下载
|
89S52上实现51单片机的串口FIFO功能。即串口的收和发均采用了FIFO作为缓冲。相信这个程序有助于单片机的新手编写串口操作-89S52 achieve 51 MCU Serial FIFO functions. Serial admission that the hair and are used as a FIFO buffer. I believe this program helps prepare newcomers MCU serial operation 下载
|
自己编写的串口UART发送的Verilog模块。与FIFO连接，可以实现自动连续发送。- 下载
|
此程序为串口芯片tl16c750在uClinux + s3c44b0环境下的驱动程序.tl16c750R FIFO设置为64BYTES, 除此之外,此程序还能缓存20条已经收到的串口数据.即存储数据量为20*64=1280BYTES的串口数据,而不用担心未及时读串口时发生数据的丢失现象.此外,附此驱动的测试程序,以及编译后的映像文件.-procedure for the serial port chip tl16c750 uClinux s3c44b0 environment of flooding action procedures. tl16c750R FIFO set to 64 BYTES, in addition, This procedure can cache 20 has been received by the serial data. that the data storage capacity of 20 * 64 = 1280BYT ES Serial data, and do not have to worry about failure occurred when reading serial data loss phenomenon. In addition, Report this driver testing procedures, and compile the map file. 下载
|