老外写的基于arm的sd/mmc读写程序，开源的项目-foreigner was based arm of sd / -3.4 reading and writing procedures, open-source project 下载
|
这是基于arm的sd卡的读写和控制的源程序-This is based on the sd card arm of literacy and control of the source 下载
|
arm程序源代码之SD卡读写模块，包括PC机，arm程序等-arms source code SD Card Reader module, including PC and arm procedures 下载
|
ARM下面带文件操作的SD卡读写程序,主控为LPC2100系列-ARM document with the following operating procedures SD Card Reader, prosecuting for the LPC2100 series 下载
|
str71x SD MMC卡 读写 文件系统- 下载
|
周立功公司为LPC213X ARM7 编写的SD卡读写模块，很详细的注释。- 下载
|
该文件为S3C44B0硬件平台配置具体函数的初始化及其SD卡读写程序- 下载
|
使用SPI接口读写SD/MMC代码，ARM7系列-use SPI interface reader SD / MMC code ARM7 family 下载
|
LPC2210以SPI方式读写SD/MMC卡的源码，里面有SD/MMC卡读写程序软件包，可以移植到其他处理器-LPC2210 SPI approach to literacy SD / MMC cards source, There are SD / MMC Card Reader software package that can be transferred to other processors 下载
|
第1章－SD卡读写模块 1. sdconfig.h: 该文件为SD卡读写模块配置头文件，用户可根据实际硬件条件进行修改. 2. SD目录 : SD卡读写模块的全部文件,一般不用修改. 3. 建议sdconfig.h文件不要放于SD目录中，因为SD目录中的文件一般无须修改,sdconfig.h通常会有改动. 4. 例子见上一级目录的SDExample目录.-Chapter 1-SD Card Reader module 1. Sdconfig.h : This document SD Card Reader module configuration files, users can be based on actual hardware changes. 2. SD Contents : SD Card Reader module all documents, generally need not be amended. 3. Recommendations sdconfig.h documents will not put SD directory because the directory SD generally no need to amend the document, sdconfig.h usually subject to change. 4. See above examples SDExample a directory of directories. 下载
|